Before you consider buying a 3500 USED 5.9 "HO" "C" 08/04 PROD DATE engine, you must know a little about the company that produces the original of this engine and its history and also the engines it has been manufacturing.
The 3500 5.9 "HO" "C" engines are products of Dodge. When you delve deep into the history of the 5.9 engines manufactured by this company, they were used even in the first generation Dodge Ram trucks. This first generation engine was a 360 cubic inches V8 engine. The first generation period of Dodge Ram was between 1981 and 1993. In 1989, this 5.9 liter V8 engine got a throttle body fuel injection and this increased its output by 20 hp. Rear ABS was also made the standard equipment during this year.
Substantial upgradation of the 5.9 liter engines took place in 1992 with multi-port fuel injection, new manifolds and higher compression cylinder heads and this upgradation led to a remarkable higher output. The transmission offered for this engine was a heavy-duty overdrive Torqueflite automatic transmission, which was called the A518. A518 was redesignated as 46RH in 1992. If you want to know what 46RH means, the initial "4" means 4-speed transmission, the second digit denotes the relative torque capacity of the transmission and the last letter "R" is an abbreviation of rear-wheel drive transmission. "H" denotes hydraulic shift control.
If you see the output of these 5.9 liter engines, between 1981 and 1988, it was 170 hp, between 1989 and 1992, it was 190 hp, in 1993, it was 230 hp and between 1989 and 1993, it was 160 hp. It should be noted that between 1989 and 1993, it was a Cummins Diesel I6 engine.
When the second generation started in 1994, the company decided to continue with the same engine offerings. Models during this generation included the 3500 dual rear wheel one-ton in both two and four wheel drive. There were 8-feet or 2.4 meter boxes in these 3500 Rams. The old second generation style was carried over even during the model year 2002. The third generation Ram for the 3500 variant did not appear till 2003.
Transmissions for the 5.9 liter V8 engine were the A518/46RH-RE which were suitable for reasonably medium level heavy duty applications. A NV4500 was the standard transmission on the 3500 trucks. As far as the transfer cases were concerned, the NP241DHD was the standard one on 3500 trucks between 1998 and 2002. All the 3500 trucks used Dana 60 front axles. It was in the year 2002 that these 3500 trucks saw eventual phase out of the Center axle disconnect and a switch to front axles which were permanently locked in.
The third generation of 3500 trucks commenced in 2003. It was decided by the company that the 3500 series would retain the live axles so as to continue to have excellent longevity and durability.
The outputs of these 5.9 liter engines of 3500 trucks during the third generation period ranged between 235 and 325 hp.
About the Author
While attempting to buy a 3500 USED 5.9 "HO" "C" 08/04 PROD DATE engine for your vehicle, you should understand that is a challenging task. You should shop around and find out a good dealer who can give you a good used engine. You should watch out for the marketing people who will try to convince you with their gift of the gab. Mere rhetoric can not get you the right engine. Simply put, you should find out a dealer who will show a genuine enthusiasm to help you to find out the used engine you want. While inspecting the engines before zeroing in on the right one for your vehicle, you should ensure to have your mechanic with you to assist you in the process. Find more http://www.gotengines.com/dodge/dodge3500-engines.html
No comments:
Post a Comment